Artikelname

Automatic Panel Sprayer (EX version)

Kurzbeschreibung

This pneumatic paint sprayer has been specifically developed for preparing test panels of steel sheet with a defined coating thickness applied in single- or multi-layer processes. The spray gun – single or twin version – is fixed in position and traverses in front of a test panel which can be moved up and/or down. The spray distance, speed and stroke height are variable.

Artikelname

Buchholz hardness tester

Kurzbeschreibung

This basic indentation hardness test device is intended for measuring the sag resistance of plastic deformable coatings. An indenter of defined weight is placed on the specimen. The length of the impression is then recorded using a measuring magnifier, and compared with the values in a chart.

Artikelname

Mandrel bend tester

Kurzbeschreibung

This test device provides a quick and simple method of measuring the elasticity of coatings by bending a specimen of varnished steel sheet over a cylindrical mandrel of defined diameter or over a conical mandrel.

Artikelname

Adjusteble film applicator

Kurzbeschreibung

The supporting plates on this film applicator are wider at the bottom, preventing the coating material from escaping during application. The gap width on this applicator can be altered in 10 µm steps from 0 to more than 3800 µm by adjusting the blade appropriately.

Artikelname

Film applicator frame

Kurzbeschreibung

For producing uniform layers of coating substances, adhesives and similar products on flat substrates.
These applicators are suitable for aqueous, acidic and alkaline products.

Artikelname

Grindometer Ref 1509-1512

Kurzbeschreibung

The Grindometer is used to determine the fineness-of-grind and large particles or agglomerates in a dispersion. It does not determine the actual grain size or grain distribution.

Artikelname

Paint/Ink mixer RM 500

Kurzbeschreibung

Model RM 500 implements state-of-the-art technology and is highly reliable,
ergonomic operating mode and shortest mixing times (even with critical, thixotropic media, e.g. printing ink). Container sizes from 50 ml – 5 litres (infinitely variable clamping).
Equipment dimensions: W x D x H (470 x 600 x 800 mm)

Artikelname

Inkmixer RM 501

Kurzbeschreibung

The INKMIXER RM 501- SPS bench-top ink mixing device is the result of intensive development work at Olbrich know how. The INKMIXER implements modern mixing technology for closed containers for Newtonian fluids and thixotropic media such as e.g. printing inks.

Artikelname

Paint mixing device RM 5001

Kurzbeschreibung

Paint mixer RM 5001 – Stand-alone version for container sizes from 50 ml - 10 litres (30 kg). The containers are clamped either manually or automatically by way of a clamping motor, depending on the variant.

Artikelname

Disperser 5001

Kurzbeschreibung

RM 5001 CE “ DISPERSER
Model RM 5001 – SPS is an automatic paint mixing machine for use in laboratories or production areas. Meets all requirements on modern mixing technology in closed containers for Newtonian fluids – paints and varnishes, stains, inks, etc. – and for testing the fineness-of-grind of pigments and granulates in accordance with the relevant standards.
Further applications: Deburring technology and impact testing and
for testing the effectiveness of dispersion agents

Artikelname

"Multilight" colour-matching booth

Kurzbeschreibung

The MULTILIGHT provides standardised lighting conditions for visual colour-matching – independent of the time of day or the season. The MULTILIGHT is a modern, illuminated cabinet that enables reproducible colour-matching in compliance with DIN, ISO, ASTM, BS,CIE, M & S and other standards, ensuring quality assurance with defined tolerances for customer-manufact.urer dialogue

Artikelname

Cross-hatch tester

Kurzbeschreibung

Cross-hatch testers incorporate multiple blades with a cutting edge, or are available in a circular design with 6 cutting edges.

Artikelname

Glosmeter

Kurzbeschreibung

Gloss meter with measuring geometries 20°, 60°, and 85° for surfaces with a medium and low rate of “shine”.

Artikelname

Ball impact tester

Kurzbeschreibung

The ball impact tester complies with DIN EN ISO and is used for testing paint systems on metal substrates.

Artikelname

Coating roller system,Ref 1107/2020

Kurzbeschreibung

For producing uniform layers of paints, adhesives and similar products on flat surfaces. This applicator is suitable for aqueous, acidic and alkaline media.

Artikelname

Multi-applicator

Kurzbeschreibung

Applicator with adjustable gap for producing uniform layers of paint, adhesive and similar products on flat surfaces.

Artikelname

Pyknometer

Kurzbeschreibung

Pyknometers are used in quality control for detecting faults in the composition of paints. The density provides information on the purity and quality of ingredients, semi-finished and finished products.

Artikelname

Wet-film thickness gauge

Kurzbeschreibung

Gauge for measuring the layer thickness of freshly applied paint in its wet state.

Artikelname

semi.finished and finished products

Kurzbeschreibung

These test charts are a combination of the sample for determining the “mileage” of paint or ink and large black and white card sections for defining the concealing power.

Artikelname

Surface scatch tester

Kurzbeschreibung

Measures the abrasive or scratch hardness of coatings using a stylus under a defined or alternating test load.
The specimen is moved below the scratching tool.

Artikelname

Spiral film applicator

Kurzbeschreibung

These rods provide a cost-effective method of producing uniform, very thin layers. Rods and spirals are made of stainless steel to achieve extra-thin application, e.g. on foils and paper.

Artikelname

Dry film thickness gauge Fe and NFe

Kurzbeschreibung

Instrument for measuring the thickness of dry films on ferrous and non-ferrous substrates, e.g. steel, aluminium, brass, etc.

Artikelname

Flow cup

Kurzbeschreibung

Used to test the viscosity of paints, etc. in compliance with national and international standards. Made of high-quality aluminium with CrNi nozzles to meet the specified standard or specification (Zahn flow cup not included).

Artikelname

Taber Abraser  Ref 5131-5151

Kurzbeschreibung

This device is used to simulate abrasion on all kinds of coatings and materials. The test principle involves subjecting the specimen to abrasion applied by rotating rolls.
The range of abrasive rolls includes rubber, wool, felt, sandpaper, tungsten carbide and stoneware.

Artikelname

Viscosimeter

Kurzbeschreibung

Automatic viscosity tester with motor drive, microprocessor controls, digital display, measured value memory, RS 232 port, mains connection 220 V, 50 Hz. Suitable for Newtonian and thixotropic media.

Artikelname

Washability and scubbability tester Ref 903/5000

Kurzbeschreibung

Device developed for wash, wipe and scrub tests and for examining other related properties. Accelerated abrasion is simulated by the back-and-forth movement of two test elements (e.g. brushes) over the surface to be tested. 
Coated surfaces are tested for resistance to abrasion caused by brushes, sponges or other materials, for example on interior paints, wallpapers and carpeting

Artikelname

Washability tester Ref 903/PG

Kurzbeschreibung

Device for conducting wash, wipe and scrub tests and examining other related properties. Accelerated abrasion is simulated by the back-and-forth movement of four test elements (e.g. brushes, sponges) over the surface to be tested. 

Artikelname

Automatic film applicator

Kurzbeschreibung

Automatic FILM APPLICATOR (motor-driven)
This automatic, microprocessor-operated film applicator ensures accurate application of film layers to a substrate using a blade or spirals